Kind reminder while use the signal jammer:
1. Do not power on if antennas are not connected.
2. The functional coverage is greatly affected if antennas are not installed correctly. Do ensure the antennas are properly connected before usage.
3. When power on, keep away from computer, notebook PC, television, audio and AM/FM radio to prevent interferences.
4. The normal operational temperature is about 6 5 ° C. If the temperature is higher than the above, turn off the power immediately and contact local agent for help.
5. Its functional coverage will depend on the location and strength of the ambient mobile phone base stations.
6. Placing the device on higher position for better coverage. 2 meters height is recommended.
7. The Ni-MH rechargeable battery has estimated 500 times recharge cycles. Please contact the local agent to replace battery if it is not rechargeable.
The detailed frequency bands:
Frequency bands |
Output port |
Frequency range |
Band 1 |
CDMA |
850-894MHz |
Band 2 |
GSM |
925-960MHz |
Band 3 |
DCS/PCS |
1805-1990MHz |
Band 4 |
3G |
2110-2170MHz |
Band 5 |
GPS |
1570-1580MHz |
Band 6 |
WiFi |
2400-2500MHz |
Band 7 |
4G LTE |
725-770MHz (American standard) |
Or 790-826MHz (European standard) |
Band 8 |
4G Wimax |
2345-2400MHz (American standard) |
Or 2620-2690MHz (European standard) |
Power supply: AC Charge (AC220V-DC12V) & Car Charge (DC12V) |
Shielding Radius: (5-20) meters@-75dBm still depends on the strength signal in given area. |
Dimension: (width, height, length) 138x80x40mm and not include antennas |
Install steps:
1. Please charge battery around 5 hours before first-time use.
2. Turn off power switch before charging. Charging indicator shall lights on RED when charging the battery, the indicator will turn to GREEN color while finished.
3.Please install antennas and tight up according to the number indicator. Kindly refer to the picture below:
4. Turn on the power switch and the Power LED shall light in Green and the LED of each band will turn on, too.
5. Don’t suggest using while charging. (The operational temperature may too high about 75 ° C normally.)
Function Introduction:
* Each band could be chosen operating or not.
1. Find the dip switch on the side of the device as below left picture.
The number indicators are corresponding to the number of antennas.
2. Eight arrows toward from OFF to ON (default), by dip switching ON →OFF, each band could be disable.
3. The corresponding LED indicator shall be turn off.
Followings are the details of the way to choose to different purpose.
Disable GSM, CDMA, DCS&PCS, 3G, but to Jam the bands of WIFI, GPS, 4GLTE, 4GWIMAX only.
Step 1. Be sure the power is off.
Dip switching the 1&2&3arrow from ON → OFF.
Step 2. Disconnect the first & second& third antenna (No.1&2&3) and cover the connector with the hat.
By finished two steps allow to do step 3.
Step 3. Turn ON the power.
The device could be operated without band GSM,CDMA,DCS&PCS.
Step 4. The LED will indicate that which band is operating.
LED turns on which indicate operating.
You can following above these steps to turn ON or OFF each Jam band you want.
Accessories:
Main unit x 1pcs
Power adapter x 1pcs
Car charger x 1pcs
Omni antenna x 8pcs
This product is in stock now, we guarantee shipping within 48 hours and offer 1 year warranty for all our products. Brought to you by the leader in security devices and best Signal Jammers, Jammerall.
Important Notes for Jamming Distance: The jamming distances we mentioned on website are for customer's reference only. The actual jamming distance will be varied depending on the signal strength and the use location and if full charges, etc.
Important Notes for Portable Jammers with No Cooling Fan:
Do not use the jammer when it is charging, or it will burn the jammer as it has no built-in fan. If because of this factor due to the broken of the jammer, the customer will lose the authority of free repairation .